The Fx2000 generates powerful performance and meets your precise needs through several features: superior V/F control, V/F PG, slip compensation and Sensorless vector control as well as closed-loop vector control.
It has a user-friendly interface and environment-friendly features, including a wide graphic LCD keypad, user and macro-group support, electro-thermal functions for motor protection, and protection for input/output phase loss.
The Fx2000 is perfectly suited for the toughest, most complex applications cranes, plastic winders, high-speed elevators, cement kilns, crushers and many more.
It handles loads up to 375 kW - HD / 450 kW - ND, and is engineered to keep your machine operating at optimum efficiency, even in the hot, humid and dusty conditions that characterize India's industrial environment.
Range: Three-Phase 415V - 0.75 to 450 kW
- V/F control, V/F PG, Slip compensation, Sensorless vector control, Close Loop Vector Control
- Ideal for Heavy Duty Application Crane, Winder, Textile Application, Plastic extruders
- Built-in Crane & Wobbulation Algorithm
- Starting Torque: 250% at 0Hz for Closed Loop
- Conformal Coating complying to IEC 60721-3-3 class 3C2
- Built-in RS485 Modbus
- WEB Software control for Winder Application
- Optional Smart PLC
- User Defined Macro
- Built-in DC Reactor from 22kW to 280kW
- Built-in Braking Chopper till 30kW
Dual rating operation
Designed to be used for heavy and normal duty applications.
- Heavy duty operation: 150% of rated current, 60 sec, 200% for 3 sec
- Normal duty operation: 110% of rated current, 60 seconds
User Defined Macro Function
- User can collect parameters that are often used and keep them in User Group
- Some parameters for a specific application are in Macro Group
EASY START helps beginner users to set the essential parameters easily.
For Crane Control (External Brake Control)
- Fx2000 provides external brake control function for vertical loads such as Cranes, Lifts etc.
- User can set Brake Release freq., Pre-excite time.
- Separate parameters for hoist and lowering
- It can operate in Open Loop & Closed Loop System.
Winder Software (WEB) for Winder Application
- Tension control with load cell / dancer
- Thickness calculation
- Splicing function
- Draw function
- Traversing function
- Diameter calculation
- Taper function
- Quick stop
- Open-loop control
- Ideal for Textile
- Disturbance Pattern
- Built-in Macro
- No external controller required
- It uses the drooping characteristic of the speed with respect to the torque reference.
- In order to get good quality of product, this machine requires uniform torque from multiple motor.
- Increase the product quality by load balancing
KEB (Kinetic Energy Buffering) for power-failure
- If power-failure occurs, Fx2000 keeps controlling motor with regenerative energy till power recovery
- If outage is too long, Fx2000 safely decelerate the motor until it stops
- PLC Card (6DI, 4DO, Built-in RTC)
- Encoder Card
- I/O expansion card
- Synchronisation Card
- Position control card
- Device Net
- Ethernet Modbus-TCP IP
- CAN open